Angular Limits: Difference between revisions
Created page with "Changes a constraint's angular limits. Set the lower limit higher than the upper limit for completely unlimited movement. Examples: * Lower 0,0,0 and Upper 180,0,0 allows the part to rotate up to 180 degrees (half of a full rotation) in one direction around the X axis (the right arrow when looking from the top down), similar to a lever * Lower 0,0,-360 and Upper 0,0,360 allows the part to rotate up to a full turn in both directions around the Z axis (the up arrow), simi..."
Nikitaivanov (talk | contribs) (Created page with "Changes a constraint's angular limits. Set the lower limit higher than the upper limit for completely unlimited movement. Examples: * Lower 0,0,0 and Upper 180,0,0 allows the part to rotate up to 180 degrees (half of a full rotation) in one direction around the X axis (the right arrow when looking from the top down), similar to a lever * Lower 0,0,-360 and Upper 0,0,360 allows the part to rotate up to a full turn in both directions around the Z axis (the up arrow), simi...") |
(No difference)
|